What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 00:13
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
How good is KIIT school of management at Bhubaneswar?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Upvotes:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, the voltage could go up to 500 volts, and the fuse will not open up.
a photo is worth a thousand words.
This is 'the assistant's answer'
[image of Common-mode choke]
Do people have to be a pastor to baptize?
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is the reason behind the Russian government's negative view on foreign travel?
A circuit breaker is similar, but is resettable.
Edit 2024–10.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What are the pros and cons of arranged marriages?
The other is “what does a “fuse” do?”
At one ohm, the resistor has a maximum of 1 watt power.
There are two important concepts here.
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
In schematic diagrams this is the symbol for a fuse:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
How can I watch porn on TikTok?
This is where this question deviates from being a 'generic' question, and becomes more specific.
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It also is a device that limits the change in current flow.
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
There are three different concepts here that are getting confused.
He then describes Rainy Season and Lightning.
A fuse is a non-resetable over current circuit protector.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But… the neutral is now “floating” because of the 1 ohm resistance.
What is lightning?
He then describes the function of a fuse.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
The third is lightning and “how it gets conducted into a home.”
The bolt then partially travels down the line to your home.
but this device (an Inductor) … impedes the rapid changes in the current.
nine
First Sentence:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
eight
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–16 [ OO OLAOYE OYEBODE ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Here is a simplified AC power diagram.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These are simplified answers to the original question, and does not change anything I wrote above.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
An AC voltage/ current source, and an ac inductive load.
This one hit behind the barn.
Barnstars:
For this case there are devices called Metal oxide varistors (MOV).
One is “what exactly is in a ‘surge protector’ ? ”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This device then solves the entire problem.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.